Planar Monolithics Industries社製 Attenuator新製品のご紹介。
PMIは、数MHzから最大40 GHzまでのRFおよびマイクロ波ソリッドステートアッテネータをフルラインで提供します。
Attenuator Model No. 5399723+001 Rev. L
周波数29.8 to 30.2 MHz、Insertion Loss 9 dB Max、Input Power +10 dBm Max の7ビットアッテネータです。
ハウジングの寸法は3.675 "x 2.250" x 0.230 "です。
[特徴]
• Frequency Range: 29.8 to 30.2 MHz
• Input/Output Impedance: 50 Ohms
• Input/Output VSWR: 1.4:1 Max. - Measured 1.33:1/1.32:1
• Input Power: +10 dBm Max.
• Insertion Loss: 9 dB Max. - Measured 8.6 dB
• Attenuation Range: 0 to 63.5 dB, In 0.5 dB Steps
• Attenuation Accuracy (Normalized to Insertion Loss):
o 0 to 4 dB: ±0.2 dB - Measured ±0.15 dB
o 5 to 9 dB: ±0.3 dB - Measured ±0.14 dB
o 10 to 16 dB: ±0.5 dB - Measured ±0.21 dB
o 17 to 24 dB: ±0.6 dB - Measured ±0.13 dB
o 25 to 30 dB: ±0.7 dB - Measured ±0.25 dB
o 31 to 40 dB: ±0.7 dB - Measured ±0.25 dB
o 41 to 50 dB: ±0.7 dB - Measured ±0.25 dB
o 51-63.5 dB: ±2% of Attenuation Value - Measured ±0.69%
• Attenuation vs. Frequency: 0.1 dB Peak to Peak - Measured 0.09 dB
• Linearity (Over Any 6 dB Range): 0.5 dB Peak to Peak up to 50 dB Attenuation - Measured 0.14 dB
• Insertion Phase: 30° ± 5°
• Phase vs. Frequency: 2.8° Peak to Peak - Measured 2.51°
• Phase vs. Attenuation: 3.0° Peak to Peak, 0 to 44.0 dB: 7.5° Peak to Peak, 44.5 to 50.0 dB
• Control Input Impedance: 8 Equivalent TTL Loads Max., Including 1k Pull-Up Resistors
• Control Input Logic: TTL Driver with Rise/Fall of 20 ns
• Binary Code: 7 Bits, 0000000 = Insertion Loss
• Attenuation Per Bit: A0 = LSB = 0.5 dB, A6 = MSB = 32 dB
• Switching Speed (Control Signal 3 us Pulse, 50% Duty Cycle, 10 KHz PRF): 650 ns Delay Max., 500 ns Rise Time Max. - Measured 68 ns Delay, 128 ns Rise
• Switching Rate: 10 kHz Max.
• Power Supply: +5.0 to +5.2 VDC @ 750 mA Max. - Measured 236 mA
• Transients:
o 5 mV Peak to Peak for 0.5 dB Steps - Measured 1.9 mV Peak to Peak
o 10 mV Peak to Peak for 63.5 dB Step - Measured 4.8 mV Peak to Peak
関連データシートはこちらをClick
ハウジングの寸法は3.675 "x 2.250" x 0.230 "です。
[特徴]
• Frequency Range: 29.8 to 30.2 MHz
• Input/Output Impedance: 50 Ohms
• Input/Output VSWR: 1.4:1 Max. - Measured 1.33:1/1.32:1
• Input Power: +10 dBm Max.
• Insertion Loss: 9 dB Max. - Measured 8.6 dB
• Attenuation Range: 0 to 63.5 dB, In 0.5 dB Steps
• Attenuation Accuracy (Normalized to Insertion Loss):
o 0 to 4 dB: ±0.2 dB - Measured ±0.15 dB
o 5 to 9 dB: ±0.3 dB - Measured ±0.14 dB
o 10 to 16 dB: ±0.5 dB - Measured ±0.21 dB
o 17 to 24 dB: ±0.6 dB - Measured ±0.13 dB
o 25 to 30 dB: ±0.7 dB - Measured ±0.25 dB
o 31 to 40 dB: ±0.7 dB - Measured ±0.25 dB
o 41 to 50 dB: ±0.7 dB - Measured ±0.25 dB
o 51-63.5 dB: ±2% of Attenuation Value - Measured ±0.69%
• Attenuation vs. Frequency: 0.1 dB Peak to Peak - Measured 0.09 dB
• Linearity (Over Any 6 dB Range): 0.5 dB Peak to Peak up to 50 dB Attenuation - Measured 0.14 dB
• Insertion Phase: 30° ± 5°
• Phase vs. Frequency: 2.8° Peak to Peak - Measured 2.51°
• Phase vs. Attenuation: 3.0° Peak to Peak, 0 to 44.0 dB: 7.5° Peak to Peak, 44.5 to 50.0 dB
• Control Input Impedance: 8 Equivalent TTL Loads Max., Including 1k Pull-Up Resistors
• Control Input Logic: TTL Driver with Rise/Fall of 20 ns
• Binary Code: 7 Bits, 0000000 = Insertion Loss
• Attenuation Per Bit: A0 = LSB = 0.5 dB, A6 = MSB = 32 dB
• Switching Speed (Control Signal 3 us Pulse, 50% Duty Cycle, 10 KHz PRF): 650 ns Delay Max., 500 ns Rise Time Max. - Measured 68 ns Delay, 128 ns Rise
• Switching Rate: 10 kHz Max.
• Power Supply: +5.0 to +5.2 VDC @ 750 mA Max. - Measured 236 mA
• Transients:
o 5 mV Peak to Peak for 0.5 dB Steps - Measured 1.9 mV Peak to Peak
o 10 mV Peak to Peak for 63.5 dB Step - Measured 4.8 mV Peak to Peak
関連データシートはこちらをClick
Attenuator Model No. 5399723+002 Rev. L
周波数29.8 to 30.2 MHz、Insertion Loss 9 dB Max、Input Power +10 dBm Max の7ビットアッテネータです。
ハウジングの寸法は3.675 "x 2.250" x 0.230 "です。
[特徴]
• Frequency Range: 29.8 to 30.2 MHz
• Input/Output Impedance: 50 Ohms
• Input/Output VSWR: 1.4:1 Max. - Measured 1.35:1/1.34:1
• Input Power: +10 dBm Max.
• Insertion Loss: 9 dB Max. - Measured 8.7 dB
• Attenuation Range: 0 to 63.5 dB, In 0.5 dB Steps
• Attenuation Accuracy (Normalized to Insertion Loss):
o 0 to 4 dB: ±0.2 dB - Measured ±0.11 dB
o 5 to 9 dB: ±0.3 dB - Measured ±0.1 dB
o 10 to 16 dB: ±0.5 dB - Measured ±0.14 dB
o 17 to 24 dB: ±0.6 dB - Measured ±0.17 dB
o 25 to 30 dB: ±0.7 dB - Measured ±0.22 dB
o 31 to 40 dB: ±0.7 dB - Measured ±0.22 dB
o 41 to 50 dB: ±0.7 dB - Measured ±0.22 dB
o 51-63.5 dB: ±2% of Attenuation Value - Measured ±0.34%
• Attenuation vs. Frequency: 0.1 dB Peak to Peak - Measured 0.09 dB
• Linearity (Over Any 6 dB Range): 0.5 dB Peak to Peak up to 50 dB Attenuation - Measured 0.16 dB
• Insertion Phase: 30° ± 5°
• Phase vs. Frequency: 1.4° Peak to Peak
• Phase vs. Attenuation: ±1.5° 0 to 40 dB, Referenced to Insertion Phase - Measured ±1.25°
• Control Input Impedance: 8 Equivalent TTL Loads Max., Including 1k Pull-Up Resistors
• Control Input Logic: TTL Driver with Rise/Fall of 20 ns
• Binary Code: 7 Bits, 0000000 = Insertion Loss
• Attenuation Per Bit: A0 = LSB = 0.5 dB, A6 = MSB = 32 dB
• Switching Speed (Control Signal 3 us Pulse, 50% Duty Cycle, 10 KHz PRF): 700 ns Delay Max., 700 ns Rise Time Max. - Measured 68 ns Delay, 128 ns Rise
• Switching Rate: 10 kHz Max.
• Power Supply: +5.0 to +5.2 VDC @ 750 mA Max. - Measured 242 mA
• Transients:
o 5 mV Peak to Peak for 0.5 dB Steps - Measured 1.9 mV Peak to Peak
o 10 mV Peak to Peak for 63.5 dB Step - Measured 4.8 mV Peak to Peak
関連データシートはこちらをClick
ハウジングの寸法は3.675 "x 2.250" x 0.230 "です。
[特徴]
• Frequency Range: 29.8 to 30.2 MHz
• Input/Output Impedance: 50 Ohms
• Input/Output VSWR: 1.4:1 Max. - Measured 1.35:1/1.34:1
• Input Power: +10 dBm Max.
• Insertion Loss: 9 dB Max. - Measured 8.7 dB
• Attenuation Range: 0 to 63.5 dB, In 0.5 dB Steps
• Attenuation Accuracy (Normalized to Insertion Loss):
o 0 to 4 dB: ±0.2 dB - Measured ±0.11 dB
o 5 to 9 dB: ±0.3 dB - Measured ±0.1 dB
o 10 to 16 dB: ±0.5 dB - Measured ±0.14 dB
o 17 to 24 dB: ±0.6 dB - Measured ±0.17 dB
o 25 to 30 dB: ±0.7 dB - Measured ±0.22 dB
o 31 to 40 dB: ±0.7 dB - Measured ±0.22 dB
o 41 to 50 dB: ±0.7 dB - Measured ±0.22 dB
o 51-63.5 dB: ±2% of Attenuation Value - Measured ±0.34%
• Attenuation vs. Frequency: 0.1 dB Peak to Peak - Measured 0.09 dB
• Linearity (Over Any 6 dB Range): 0.5 dB Peak to Peak up to 50 dB Attenuation - Measured 0.16 dB
• Insertion Phase: 30° ± 5°
• Phase vs. Frequency: 1.4° Peak to Peak
• Phase vs. Attenuation: ±1.5° 0 to 40 dB, Referenced to Insertion Phase - Measured ±1.25°
• Control Input Impedance: 8 Equivalent TTL Loads Max., Including 1k Pull-Up Resistors
• Control Input Logic: TTL Driver with Rise/Fall of 20 ns
• Binary Code: 7 Bits, 0000000 = Insertion Loss
• Attenuation Per Bit: A0 = LSB = 0.5 dB, A6 = MSB = 32 dB
• Switching Speed (Control Signal 3 us Pulse, 50% Duty Cycle, 10 KHz PRF): 700 ns Delay Max., 700 ns Rise Time Max. - Measured 68 ns Delay, 128 ns Rise
• Switching Rate: 10 kHz Max.
• Power Supply: +5.0 to +5.2 VDC @ 750 mA Max. - Measured 242 mA
• Transients:
o 5 mV Peak to Peak for 0.5 dB Steps - Measured 1.9 mV Peak to Peak
o 10 mV Peak to Peak for 63.5 dB Step - Measured 4.8 mV Peak to Peak
関連データシートはこちらをClick
